Kamis, 14 Februari 2013

Tugas Cisco Packet Tracer













SERVER |
SERVER I – SERVER I
SERVER>ping 192.168.0.1
Pinging 192.168.0.1 with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time=4ms TTL=128
Reply from 192.168.0.1: bytes=32 time=2ms TTL=128
Reply from 192.168.0.1: bytes=32 time=2ms TTL=128
Reply from 192.168.0.1: bytes=32 time=5ms TTL=128
Ping statistics for 192.168.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 2ms, Maximum = 5ms, Average = 3ms
SERVER – CLIENT 1
SERVER>ping 192.168.0.2
Pinging 192.168.0.2 with 32 bytes of data:
Reply from 192.168.0.2: bytes=32 time=21ms TTL=128
Reply from 192.168.0.2: bytes=32 time=8ms TTL=128
Reply from 192.168.0.2: bytes=32 time=8ms TTL=128
Reply from 192.168.0.2: bytes=32 time=9ms TTL=128
Ping statistics for 192.168.0.2:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 8ms, Maximum = 21ms, Average = 11ms


SERVER – CLIENT 2
SERVER>ping 192.168.0.3
Pinging 192.168.0.3 with 32 bytes of data:
Reply from 192.168.0.3: bytes=32 time=19ms TTL=128
Reply from 192.168.0.3: bytes=32 time=10ms TTL=128
Reply from 192.168.0.3: bytes=32 time=7ms TTL=128
Reply from 192.168.0.3: bytes=32 time=8ms TTL=128
Ping statistics for 192.168.0.3:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 7ms, Maximum = 19ms, Average = 11ms
SERVER – CLIENT 3
SERVER>ping 192.168.0.4
Pinging 192.168.0.4 with 32 bytes of data:
Reply from 192.168.0.4: bytes=32 time=19ms TTL=128
Reply from 192.168.0.4: bytes=32 time=9ms TTL=128
Reply from 192.168.0.4: bytes=32 time=8ms TTL=128
Reply from 192.168.0.4: bytes=32 time=8ms TTL=128
Ping statistics for 192.168.0.4:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 8ms, Maximum = 19ms, Average = 11ms
SERVER – CLIENT 4
SERVER>ping 192.168.0.5
Pinging 192.168.0.5 with 32 bytes of data:
Reply from 192.168.0.5: bytes=32 time=17ms TTL=128
Reply from 192.168.0.5: bytes=32 time=6ms TTL=128
Reply from 192.168.0.5: bytes=32 time=9ms TTL=128
Reply from 192.168.0.5: bytes=32 time=5ms TTL=128
Ping statistics for 192.168.0.5:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 5ms, Maximum = 17ms, Average = 9ms
CLIENT 1 – CLIENT 2
PC>PING 192.168.0.3
Pinging 192.168.0.3 with 32 bytes of data:
Reply from 192.168.0.3: bytes=32 time=8ms TTL=128
Reply from 192.168.0.3: bytes=32 time=6ms TTL=128
Reply from 192.168.0.3: bytes=32 time=7ms TTL=128
Reply from 192.168.0.3: bytes=32 time=6ms TTL=128
Ping statistics for 192.168.0.3:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 6ms, Maximum = 8ms, Average = 6ms
CLIENT 1 – CLIENT 3
PC>PING 192.168.0.4
Pinging 192.168.0.4 with 32 bytes of data:
Reply from 192.168.0.4: bytes=32 time=10ms TTL=128
Reply from 192.168.0.4: bytes=32 time=9ms TTL=128
Reply from 192.168.0.4: bytes=32 time=8ms TTL=128
Reply from 192.168.0.4: bytes=32 time=8ms TTL=128
Ping statistics for 192.168.0.4:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 8ms, Maximum = 10ms, Average = 8ms
CLIENT 1 – CLIENT 4
PC>PING 192.168.0.5
Pinging 192.168.0.5 with 32 bytes of data:
Reply from 192.168.0.5: bytes=32 time=14ms TTL=128
Reply from 192.168.0.5: bytes=32 time=9ms TTL=128
Reply from 192.168.0.5: bytes=32 time=9ms TTL=128
Reply from 192.168.0.5: bytes=32 time=8ms TTL=128
Ping statistics for 192.168.0.5:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 8ms, Maximum = 14ms, Average = 10ms
CLIENT 2 – CLIENT 3
PC>PING 192.168.0.4
Pinging 192.168.0.4 with 32 bytes of data:
Reply from 192.168.0.4: bytes=32 time=15ms TTL=128
Reply from 192.168.0.4: bytes=32 time=8ms TTL=128
Reply from 192.168.0.4: bytes=32 time=6ms TTL=128
Reply from 192.168.0.4: bytes=32 time=7ms TTL=128
Ping statistics for 192.168.0.4:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 6ms, Maximum = 15ms, Average = 9ms
CLIENT 2 – CLIENT 4
PC>PING 192.168.0.5
Pinging 192.168.0.5 with 32 bytes of data:
Reply from 192.168.0.5: bytes=32 time=19ms TTL=128
Reply from 192.168.0.5: bytes=32 time=7ms TTL=128
Reply from 192.168.0.5: bytes=32 time=8ms TTL=128
Reply from 192.168.0.5: bytes=32 time=7ms TTL=128
Ping statistics for 192.168.0.5:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 7ms, Maximum = 19ms, Average = 10ms
CLIENT 3 – CLIENT 4
PC>PING 192.168.0.5
Pinging 192.168.0.5 with 32 bytes of data:
Reply from 192.168.0.5: bytes=32 time=21ms TTL=128
Reply from 192.168.0.5: bytes=32 time=8ms TTL=128
Reply from 192.168.0.5: bytes=32 time=9ms TTL=128
Reply from 192.168.0.5: bytes=32 time=10ms TTL=128
Ping statistics for 192.168.0.5:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 8ms, Maximum = 21ms, Average = 12ms

SERVER II
SERVERII – CLIENT 1
Pinging 172.17.0.1 with 32 bytes of data:
Reply from 172.17.0.1: bytes=32 time=4ms TTL=128
Reply from 172.17.0.1: bytes=32 time=3ms TTL=128
Reply from 172.17.0.1: bytes=32 time=3ms TTL=128
Reply from 172.17.0.1: bytes=32 time=1ms TTL=128
Ping statistics for 172.17.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 1ms, Maximum = 4ms, Average = 2ms
SERVERII – CLIENT 2
SERVER>PING 172.17.0.2
Pinging 172.17.0.2 with 32 bytes of data:
Reply from 172.17.0.2: bytes=32 time=14ms TTL=128
Reply from 172.17.0.2: bytes=32 time=8ms TTL=128
Reply from 172.17.0.2: bytes=32 time=8ms TTL=128
Reply from 172.17.0.2: bytes=32 time=7ms TTL=128
Ping statistics for 172.17.0.2:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 7ms, Maximum = 14ms, Average = 9ms
SERVERII – CLIENT 3
SERVER>PING 172.17.0.3
Pinging 172.17.0.3 with 32 bytes of data:
Reply from 172.17.0.3: bytes=32 time=19ms TTL=128
Reply from 172.17.0.3: bytes=32 time=8ms TTL=128
Reply from 172.17.0.3: bytes=32 time=8ms TTL=128
Reply from 172.17.0.3: bytes=32 time=9ms TTL=128
Ping statistics for 172.17.0.3:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 8ms, Maximum = 19ms, Average = 11ms
SERVERII – CLIENT 4
SERVER>PING 172.17.0.4
Pinging 172.17.0.4 with 32 bytes of data:
Reply from 172.17.0.4: bytes=32 time=17ms TTL=128
Reply from 172.17.0.4: bytes=32 time=7ms TTL=128
Reply from 172.17.0.4: bytes=32 time=9ms TTL=128
Reply from 172.17.0.4: bytes=32 time=8ms TTL=128
Ping statistics for 172.17.0.4:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 7ms, Maximum = 17ms, Average = 10ms
CLIENT 1 – CLIENT 2
PC>PING 172.17.0.2
Pinging 172.17.0.2 with 32 bytes of data:
Reply from 172.17.0.2: bytes=32 time=17ms TTL=128
Reply from 172.17.0.2: bytes=32 time=7ms TTL=128
Reply from 172.17.0.2: bytes=32 time=7ms TTL=128
Reply from 172.17.0.2: bytes=32 time=9ms TTL=128
Ping statistics for 172.17.0.2:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 7ms, Maximum = 17ms, Average = 10ms
CLIENT 1 – CLIENT 3
PC>PING 172.17.0.3
Pinging 172.17.0.3 with 32 bytes of data:
Reply from 172.17.0.3: bytes=32 time=18ms TTL=128
Reply from 172.17.0.3: bytes=32 time=7ms TTL=128
Reply from 172.17.0.3: bytes=32 time=9ms TTL=128
Reply from 172.17.0.3: bytes=32 time=10ms TTL=128
Ping statistics for 172.17.0.3:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 7ms, Maximum = 18ms, Average = 11ms
CLIENT 1 – CLIENT 4
PC>PING 172.17.0.4
Pinging 172.17.0.4 with 32 bytes of data:
Reply from 172.17.0.4: bytes=32 time=12ms TTL=128
Reply from 172.17.0.4: bytes=32 time=10ms TTL=128
Reply from 172.17.0.4: bytes=32 time=8ms TTL=128
Reply from 172.17.0.4: bytes=32 time=5ms TTL=128
Ping statistics for 172.17.0.4:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 5ms, Maximum = 12ms, Average = 8ms
CLIENT 2 – CLIENT 3
PC>PING 172.17.0.3
Pinging 172.17.0.3 with 32 bytes of data:
Reply from 172.17.0.3: bytes=32 time=17ms TTL=128
Reply from 172.17.0.3: bytes=32 time=7ms TTL=128
Reply from 172.17.0.3: bytes=32 time=7ms TTL=128
Reply from 172.17.0.3: bytes=32 time=7ms TTL=128
Ping statistics for 172.17.0.3:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 7ms, Maximum = 17ms, Average = 9ms
CLIENT 2 – CLIENT 3
PC>PING 172.17.0.4
Pinging 172.17.0.4 with 32 bytes of data:
Reply from 172.17.0.4: bytes=32 time=14ms TTL=128
Reply from 172.17.0.4: bytes=32 time=9ms TTL=128
Reply from 172.17.0.4: bytes=32 time=9ms TTL=128
Reply from 172.17.0.4: bytes=32 time=12ms TTL=128
Ping statistics for 172.17.0.4:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 9ms, Maximum = 14ms, Average = 11ms
CLIENT 3 – CLIENT 4
PC>PING 192.168.0.5
Pinging 192.168.0.5 with 32 bytes of data:
Reply from 192.168.0.5: bytes=32 time=21ms TTL=128
Reply from 192.168.0.5: bytes=32 time=8ms TTL=128
Reply from 192.168.0.5: bytes=32 time=9ms TTL=128
Reply from 192.168.0.5: bytes=32 time=10ms TTL=128
Ping statistics for 192.168.0.5:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 8ms, Maximum = 21ms, Average = 12ms
Diposting oleh di 0 komentar

Jumat, 04 Januari 2013


Cara Menbuat Galon Melalui aoutocad
Perhatikan Gambar Galon di atas Penulis akan menjelaskan cara menggambar galon tersebut.
Perhatikan Gambar 2.1 kita akan mulai menggambar dari titik H1. Penulis akan menjelaskan cara menyelesaikan Galon dengan beberapa Perintah menggunakanCommand  LINE .agar dapat memahami kegunaan dari Command line
Aktifkan POLAR (F10) dan OSNAP (F3) dengan cara klick POLAR & OSNAP sampai ON atau tekan F10 dan F3. Klick kanan pada Osnap -Setting dan cawangEndpoint,midpoint, Centerpoint, Intersection dan Extension-OK
LINE
Command: L (Enter)
LINE Specify first point:Klick sembarang pada layar
Specify next point or [Undo]: @30<90 (Enter)
Specify next point or [Undo]: @10<180 (enter)
Specify next point or [Close/Undo]: @200<270 (enter)
Specify next point or [Close/Undo]: @70<0 (enter)
Perintah ini berakhir di A1 selanjutnya kita tidak akan menggunakan ‘’@’’ & ‘’<’’ tapi cukup mengarahkan kursor ke atas,kiri dan kanan

Arahkan Kursor ke  atas sampai muncul garis Polar Putus-putus
Specify next point or [Close/Undo]: 20 (enter)
Specify next point or [Close/Undo]: 5 arahkan kursor ke kiri (enter)
Specify next point or [Close/Undo]: 20 arahkan kursor ke atas (enter)
Specify next point or [Close/Undo]: 5 arahkan  kursor ke kanan (enter)
Specify next point or [Close/Undo]: 20 arahkan kursor ke atas (enter)
Specify next point or [Close/Undo]: 5 arahkan kursor ke kiri (enter)
Specify next point or [Close/Undo]: 20 arahkan kursor ke atas (enter)
Specify next point or [Close/Undo]: 5 arahkan  kursor ke kanan (enter)
Specify next point or [Close/Undo]: 20 arahkan kursor ke atas (enter)
Specify next point or [Close/Undo]: 5 arahkan kursor ke kiri (enter)
Specify next point or [Close/Undo]: 20 arahkan kursor ke atas (enter)
Specify next point or [Close/Undo]: 5 arahkan  kursor ke kanan (enter)
Specify next point or [Close/Undo]: 20 arahkan kursor ke atas (enter)
Specify next point or [Close/Undo]: c (enter)
Klick Garis tengah yang panjangnya 200 dan tekan delete untuk menghapus garis tersebut sampai gambar anda sesuai dengan gambar 2.1
Gambar 2.1
Sekarang kita akan membuat radius pada sudut galon menggunakan perintah FILLET
FILLET
Command: F
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r (Enter)
Specify fillet radius <0.0000>: 2 (Enter)
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: Klick garis A
Select second object or shift-select to apply corner: Klick garis A1

Command: f
Current settings: Mode = TRIM, Radius = 2.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: r (Enter)
Specify fillet radius <2.0000>: 1 (Enter)
Select first object or [Undo/Polyline/Radius/Trim/Multiple]: m (Enter) Klik garis A1
Select second object or shift-select to apply corner: Klick garis B
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:Klick garis B
Select second object or shift-select to apply corner: Klick garis B1
Lakukan ini pada semua sudut galon: B1-C, C-C1, C1-D, D-D1, D1-E, E-E1, E1-F, F-F1, F1-G, G-G1 dengan Radius 1
Untuk garis G1-H dan H-H1 beri ‘’ r’’ 10
Langkah selanjutnya kita akan menyatukan setiap garis yang ada. Karena garis yang menggunakan perintah Line belum menjadi satu kesatuan

Gambar 2.2
Kita akan menggunakan perintah PEDIT untuk menyatukan gambar 2.2
PEDIT
Command: pe (Enter)
PEDIT Select polyline or [Multiple]: m (Enter)
Select objects:  Klick Titik C
Specify opposite corner: Klick titik D
Specify opposite corner: 31 found
Select objects: (Enter)
Convert Lines and Arcs to polylines [Yes/No]? <Y> (Enter)
Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]: j (Enter)
Join Type = Extend
Enter fuzz distance or [Jointype] <0.0000>: (Enter)
30 segments added to polyline
Enter an option [Close/Open/Join/Width/Fit/Spline/Decurve/Ltype gen/Undo]: (Enter)
Offset
Command: o (Enter)
OFFSET
Current settings: Erase source=No  Layer=Source  OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <Through>: 1 (Enter)
Select object to offset or [Exit/Undo] <Exit>: Klick garis A-B
Specify point on side to offset or [Exit/Multiple/Undo] <Exit>: Klick daerah A1-B1
Select object to offset or [Exit/Undo] <Exit>: (enter)
Gunakan Command Line untuk menambah garis pada A-A1 dan B-B1 kemudian gunakan perintah PEDIT sekali lagi untuk menyatukan semua garis yang ada.
Apabila gambar anda benar hasilnya kira-kira seperti gambar 2.2 kiri
Kita akan menjadikan gambar 2D menjadi 3D. perhatikan gambar 2.3 di bawah ini

 


Gambar 2.3
Klick SE Isometric maka tampilan gambar akan seperti gambar 2.3 selanjutnya beri perinta REVOLVE.

REVOLVE
Command: rev (Enter)
REVOLVE
Current wire frame density:  ISOLINES=4
Select objects: Klick garis galon
Select objects: 1 found
Select objects: (enter)
Specify start point for axis of revolution or
define axis by [Object/X (axis)/Y (axis)]: Klick titik A ( pada ujung garis)
Specify endpoint of axis: Klick  garis B (sampai muncul Garis polar baru Klick)
Specify angle of revolution <360>: 360 (enter)
Catatan
Apabila  (Specify angle of revolution <360>) di beri 180 maka akan menghasilkan Posisi galon yang terpotong/ separu
Diposting oleh di 0 komentar
Langganan: Postingan (Atom)